|
DATAWELL DIRECTIONAL WAVERIDER MK III |
 |
- Wave motion sensor based on a stabilised platform, accelerometers, and magnetic compass
- measures wave height for wave periods of 1.6 to 30 seconds, accuracy 0.5 % of measured value
- measures wave direction
- measures water temperature
- GPS for buoy monitoring and tracking through HF link
- internal logger
- LED flash antenna
- 0.9 m (0.7 m) diameter spherical hull of AISI 316
- optional Cunifer hull, warranted not to corrode
- 3 years (1 year) battery life
- HF transmitter range 50 km over sea
- optional Argos module for ocean wide coverage and unlimited range
- optional Orbcomm module (incl. GPS module) for two-way communication with buoy, independent of global position
- optional Iridium module for ocean wide two-way communication, full spectra every 30 minutes
- optional GSM module for data transmission via the GSM network
- optional Solar Panel system.
- optional hull painting
|
|
 |
- wave motion sensor based on GPS
- measures wave height for wave periods of 1.6 to 100 seconds
- 1 cm precision in all directions (free floating)
- measures wave direction
- measures water temperature (optional)
- GPS for buoy monitoring and tracking through HF link
- internal logger
- LED flash antenna
- 0.9 m (0.7 m) diameter spherical hull of AISI 316
- optional Cunifer hull, warranted not to corrode
- 2 years (1 year) battery life
- HF transmitter range 50 km over sea
- optional Argos module for ocean wide coverage and unlimited range
- optional Orbcomm module (incl. GPS module) for two-way communication with buoy, independent of global position ( not available for 0.7 m version )
- optional GSM module for data transmission via the GSM network
- optional Solar Panel system.
- optional hull painting
|
|
|
DATAWELL (DIRECTIONAL) WAVERIDER® RECEIVER RX-C |
|
|
- receiver for the Directional Waverider® and the WR-SG
- in addition to the serial port, featuring an Ethernet network port, for direct connection to a corporate LAN or an internet router
- a built-in embedded web server enables remote monitoring and configuration
- compact: 230 x 100 x 200 mm (W x H x D), dedicated, and transparent data transfer
- backlit LCD display shows signal quality
- increased dynamic range and more forgiving to noise and interference
- 25.5 - 35.5 MHz, electronically tuneable reception frequency (PLL + DDS)
- memory for 6 different buoy frequencies
- radio range 50 km
- RS232 interface for connection with a PC
- low power makes battery supply practical (optional)
|
|
|
|
- portable, specially designed for buoy rescue operations
- based on the RX-C receiver
- operates from four standard 1.5 V AA-batteries
- 25.5 - 35.5 MHz, electronically tuneable reception frequency (PLL + DDS)
- special data collection algorithm for high reliability
- displays GPS position of buoy on a 32 character LCD display
- radio range line of sight (max 10 km) with flexible short antenna, and 50 km with standard receiving antenna
- headphone output for listening to HF audio signal
- possiblity for tracking a Waverider without GPS when using a directional antenna
|
|
|
|
|
|
|
